/**
 * @file bread_compact_wifi.c
 * @brief Implementation of common board-level hardware registration APIs for peripherals.
 *
 * @copyright Copyright (c) 2021-2025 Tuya Inc. All Rights Reserved.
 */

#include "tuya_cloud_types.h"

#include "tal_api.h"

#include "tdd_audio_no_codec.h"

#if defined(ENABLE_BUTTON) && (ENABLE_BUTTON == 1)
#include "tdd_button_gpio.h"
#endif

#include "board_config.h"
#include "oled_ssd1306.h"
#include "board_com_api.h"

/***********************************************************
************************macro define************************
***********************************************************/

#if defined(ENABLE_BUTTON) && (ENABLE_BUTTON == 1)
/*
 * ESP32S3 breadboard typically exposes a BOOT button on GPIO0.
 * If your hardware uses a different GPIO, adjust this macro accordingly.
 */
#ifndef BOARD_BUTTON_PIN
#define BOARD_BUTTON_PIN       TUYA_GPIO_NUM_0
#endif

#ifndef BOARD_BUTTON_ACTIVE_LV
#define BOARD_BUTTON_ACTIVE_LV TUYA_GPIO_LEVEL_LOW
#endif
#endif

/***********************************************************
***********************typedef define***********************
***********************************************************/

/***********************************************************
***********************variable define**********************
***********************************************************/

/***********************************************************
***********************function define**********************
***********************************************************/
static OPERATE_RET __board_register_audio(void)
{
    OPERATE_RET rt = OPRT_OK;

#if defined(AUDIO_CODEC_NAME)
    TDD_AUDIO_NO_CODEC_T cfg = {0};
    cfg.i2s_id = 0;
    cfg.mic_sample_rate = 16000;
    cfg.spk_sample_rate = 16000;

    TUYA_CALL_ERR_RETURN(tdd_audio_no_codec_register(AUDIO_CODEC_NAME, cfg));
#endif

    return rt;
}

static OPERATE_RET __board_register_button(void)
{
#if !defined(ENABLE_BUTTON) || (ENABLE_BUTTON != 1)
    return OPRT_OK;
#else
    OPERATE_RET rt = OPRT_OK;

#if defined(BUTTON_NAME)
    BUTTON_GPIO_CFG_T button_hw_cfg = {
        .pin   = BOARD_BUTTON_PIN,
        .level = BOARD_BUTTON_ACTIVE_LV,
        .mode  = BUTTON_TIMER_SCAN_MODE,
        .pin_type.gpio_pull = TUYA_GPIO_PULLUP,
    };

    TUYA_CALL_ERR_RETURN(tdd_gpio_button_register(BUTTON_NAME, &button_hw_cfg));
#endif

    return rt;
#endif
}

/**
 * @brief Registers all the hardware peripherals (audio, button, LED) on the board.
 * 
 * @return Returns OPERATE_RET_OK on success, or an appropriate error code on failure.
 */
OPERATE_RET board_register_hardware(void)
{
    OPERATE_RET rt = OPRT_OK;
    TUYA_CALL_ERR_LOG(__board_register_button());

    TUYA_CALL_ERR_LOG(__board_register_audio());

    return rt;
}

int board_display_init(void)
{
    return oled_ssd1306_init();
}

void *board_display_get_panel_io_handle(void)
{
    return oled_ssd1306_get_panel_io_handle();
}

void *board_display_get_panel_handle(void)
{
    return oled_ssd1306_get_panel_handle();
}