/** * @file tuya_error_code.h * @brief Defines the error codes used in the Tuya SDK. * * The error codes in this file are used across various modules of the SDK to * indicate the result of operations. These error codes cover a range of issues * from network errors to memory allocation failures. Each error code has a * corresponding negative value, which is returned in function calls to indicate * a specific type of error. * * The error codes are divided into several main sections, each corresponding to * a module or functional area of the SDK: * - Global error codes (GLOBAL) * - Base operating system adapter error codes (BASE_OS_ADAPTER) * - Base utilities error codes (BASE_UTILITIES) * - Base security error codes (BASE_SECURITY) * - Base log management error codes (BASE_LOG_MNG) * - Base time queue error codes (BASE_TIMEQ) * - Base message queue error codes (BASE_MSGQ) * - Middleware HTTP error codes (MID_HTTP) * - Middleware MQTT error codes (MID_MQTT) * * Using these error codes can help developers quickly locate problems and * improve development efficiency. * * @copyright Copyright (c) 2021-2024 Tuya Inc. All Rights Reserved. */ #ifndef TUYA_ERROR_CODE_H #define TUYA_ERROR_CODE_H #ifdef __cplusplus extern "C" { #endif // clang-format off /**************************************************************************** the error code marco define for module GLOBAL ****************************************************************************/ #define OPRT_OK (0x0000) // 0, Execution successful #define OPRT_COM_ERROR (-0x0001) //-1, Invalid parameter #define OPRT_INVALID_PARM (-0x0002) //-2, Invalid parameter #define OPRT_MALLOC_FAILED (-0x0003) //-3, Memory allocation failed #define OPRT_NOT_SUPPORTED (-0x0004) //-4, Not supported #define OPRT_NETWORK_ERROR (-0x0005) //-5, Network error #define OPRT_NOT_FOUND (-0x0006) //-6, Object not found #define OPRT_CR_CJSON_ERR (-0x0007) //-7, Failed to create JSON object #define OPRT_CJSON_PARSE_ERR (-0x0008) //-8, JSON parsing failed #define OPRT_CJSON_GET_ERR (-0x0009) //-9, Failed to get JSON object #define OPRT_CR_MUTEX_ERR (-0x000a) //-10, Failed to create mutex #define OPRT_SOCK_ERR (-0x000b) //-11, Socket creation failed #define OPRT_SET_SOCK_ERR (-0x000c) //-12, Socket setting failed #define OPRT_SOCK_CONN_ERR (-0x000d) //-13, Socket connection failed #define OPRT_SEND_ERR (-0x000e) //-14, Sending failed #define OPRT_RECV_ERR (-0x000f) //-15, Receiving failed #define OPRT_RECV_DA_NOT_ENOUGH (-0x0010) //-16, Received data not enough #define OPRT_KVS_WR_FAIL (-0x0011) //-17, KV store write failed #define OPRT_KVS_RD_FAIL (-0x0012) //-18, KV store read failed #define OPRT_CRC32_FAILED (-0x0013) //-19, CRC check failed #define OPRT_TIMEOUT (-0x0014) //-20, Timeout #define OPRT_INIT_MORE_THAN_ONCE (-0x0015) //-21, Initialized more than once #define OPRT_INDEX_OUT_OF_BOUND (-0x0016) //-22, Index out of bound #define OPRT_RESOURCE_NOT_READY (-0x0017) //-23, Resource not ready #define OPRT_EXCEED_UPPER_LIMIT (-0x0018) //-24, Exceed upper limit #define OPRT_FILE_NOT_FIND (-0x0019) //-25, File not found #define OPRT_FILE_IS_FULL (-0x001a) //-26, File is full #define OPRT_FILE_OPEN_FAILED (-0x001b) //-27, File open failed #define OPRT_FILE_READ_FAILED (-0x001c) //-28, File read failed #define OPRT_FILE_WRITE_FAILED (-0x001d) //-29, File write failed #define OPRT_NOT_EXIST (-0x001e) //-30, Not exist #define OPRT_BUFFER_NOT_ENOUGH (-0x001f) //-31, Buffer not enough #define OPRT_ROUTER_NOT_FOUND (-0x0020) //-32, Router not found #define OPRT_AUTHENTICATION_NOT_FOUND (-0x0021) //-33, Authentication not found #define OPRT_AUTHENTICATION_FAIL (-0x0022) //-34, Authentication failed #define OPRT_MSG_OUT_OF_LIMIT (-0x0023) //-35, Message out of limit #define OPRT_VERSION_FMT_ERR (-0x0024) //-36, Version format error #define OPRT_DIR_OPEN_FAILED (-0x0025) //-37, DIR open failed #define OPRT_DIR_READ_FAILED (-0x0026) //-38, DIR read failed #define OPRT_EOD (-0x0027) //-39, DIR END #define OPRT_GLOBAL_ERRCODE_MAX_CNT 40 /**************************************************************************** the error code marco define for module BASE_OS_ADAPTER ****************************************************************************/ #define OPRT_BASE_OS_ADAPTER_REG_NULL_ERROR (-0x0100) //-256, System adapter registration failed #define OPRT_BASE_OS_ADAPTER_ERRCODE_MAX_CNT 1 /**************************************************************************** the error code marco define for module BASE_UTILITIES ****************************************************************************/ #define OPRT_BASE_UTILITIES_PARTITION_EMPTY (-0x0200) //-512, No free linked list #define OPRT_BASE_UTILITIES_PARTITION_FULL (-0x0201) //-513, Linked list is full #define OPRT_BASE_UTILITIES_PARTITION_NOT_FOUND (-0x0202) //-514, Linked list not traversed #define OPRT_BASE_UTILITIES_ERRCODE_MAX_CNT 3 /**************************************************************************** the error code marco define for module BASE_SECURITY ****************************************************************************/ #define OPRT_BASE_SECURITY_CRC32_FAILED (-0x0300) //-768, CRC32 calculation failed #define OPRT_BASE_SECURITY_ERRCODE_MAX_CNT 1 /**************************************************************************** the error code marco define for module BASE_LOG_MNG ****************************************************************************/ #define OPRT_BASE_LOG_MNG_DONOT_FOUND_MODULE (-0x0400) //-1024, Log module not found #define OPRT_BASE_LOG_MNG_PRINT_LOG_LEVEL_HIGHER (-0x0401) //-1025, Log level low #define OPRT_BASE_LOG_MNG_FORMAT_STRING_FAILED (-0x0402) //-1026, Log string formatting failed #define OPRT_BASE_LOG_MNG_LOG_SEQ_OPEN_FILE_FAIL (-0x0403) //-1027, Opening log sequence file failed #define OPRT_BASE_LOG_MNG_LOG_SEQ_WRITE_FILE_FAIL (-0x0404) //-1028, Writing log sequence file failed #define OPRT_BASE_LOG_MNG_LOG_SEQ_FILE_FULL (-0x0405) //-1029, Log sequence file full #define OPRT_BASE_LOG_MNG_LOG_SEQ_FILE_NOT_EXIST (-0x0406) //-1030, Log sequence file does not exist #define OPRT_BASE_LOG_MNG_LOG_SEQ_NAME_INVALIDE (-0x0407) //-1031, Log sequence name invalid #define OPRT_BASE_LOG_MNG_LOG_SEQ_CREATE_FAIL (-0x0408) //-1032, Log sequence creation failed #define OPRT_BASE_LOG_MNG_ERRCODE_MAX_CNT 9 /**************************************************************************** the error code marco define for module BASE_TIMEQ ****************************************************************************/ #define OPRT_BASE_TIMEQ_TIMERID_EXIST (-0x0600) //-1536, Timer ID already exists #define OPRT_BASE_TIMEQ_TIMERID_NOT_FOUND (-0x0601) //-1537, Specified timer ID not found #define OPRT_BASE_TIMEQ_TIMERID_UNVALID (-0x0602) //-1538, Timer ID invalid #define OPRT_BASE_TIMEQ_GET_IDLE_TIMERID_ERROR (-0x0603) //-1539, Error getting idle timer ID #define OPRT_BASE_TIMEQ_ERRCODE_MAX_CNT 4 /**************************************************************************** the error code marco define for module BASE_MSGQ ****************************************************************************/ #define OPRT_BASE_MSGQ_NOT_FOUND (-0x0700) //-1792, Message not found #define OPRT_BASE_MSGQ_LIST_EMPTY (-0x0701) //-1793, List is empty #define OPRT_BASE_MSGQ_ERRCODE_MAX_CNT 2 /**************************************************************************** the error code marco define for module MID_HTTP ****************************************************************************/ #define OPRT_MID_HTTP_BUF_NOT_ENOUGH (-0x0800) //-2048, Buffer length insufficient #define OPRT_MID_HTTP_URL_PARAM_OUT_LIMIT (-0x0801) //-2049, URL length exceeds limit #define OPRT_MID_HTTP_OS_ERROR (-0x0802) //-2050, OS error #define OPRT_MID_HTTP_PR_REQ_ERROR (-0x0803) //-2051, Prepare request error, please check if the network is normal #define OPRT_MID_HTTP_SD_REQ_ERROR (-0x0804) //-2052, Send request error, please check if the network is normal #define OPRT_MID_HTTP_RD_ERROR (-0x0805) //-2053, Read error, please check if the network is normal #define OPRT_MID_HTTP_AD_HD_ERROR (-0x0806) //-2054, Add header error #define OPRT_MID_HTTP_GET_RESP_ERROR (-0x0807) //-2055, Get response error #define OPRT_MID_HTTP_AES_INIT_ERR (-0x0808) //-2056, AES initialization error #define OPRT_MID_HTTP_AES_OPEN_ERR (-0x0809) //-2057, AES open error #define OPRT_MID_HTTP_AES_SET_KEY_ERR (-0x080a) //-2058, AES set key error #define OPRT_MID_HTTP_AES_ENCRYPT_ERR (-0x080b) //-2059, AES encryption error #define OPRT_MID_HTTP_CR_HTTP_URL_H_ERR (-0x080c) //-2060, Create HTTP URL header error #define OPRT_MID_HTTP_HTTPS_HANDLE_FAIL (-0x080d) //-2061, HTTPS handle error #define OPRT_MID_HTTP_HTTPS_RESP_UNVALID (-0x080e) //-2062, HTTPS invalid response #define OPRT_MID_HTTP_NO_SUPPORT_RANGE (-0x080f) //-2063, No support for range #define OPRT_MID_HTTP_ERRCODE_MAX_CNT 16 /**************************************************************************** the error code marco define for module MID_MQTT ****************************************************************************/ #define OPRT_MID_MQTT_DEF_ERR (-0x0900) //-2304, Definition failed #define OPRT_MID_MQTT_INVALID_PARM (-0x0901) //-2305, Invalid parameter #define OPRT_MID_MQTT_MALLOC_FAILED (-0x0902) //-2306, Memory allocation failed #define OPRT_MID_MQTT_DNS_PARSED_FAILED (-0x0903) //-2307, DNS resolution failed, please check if the network is normal #define OPRT_MID_MQTT_SOCK_CREAT_FAILED (-0x0904) //-2308, socket creation failed #define OPRT_MID_MQTT_SOCK_SET_FAILED (-0x0905) //-2309, socket set failed #define OPRT_MID_MQTT_TCP_CONNECD_FAILED (-0x0906) //-2310, tcp connection failed, please check if the network is normal #define OPRT_MID_MQTT_TCP_TLS_CONNECD_FAILED (-0x0907) //-2311, tcp tls connection failed, please check if the network is normal #define OPRT_MID_MQTT_PACK_SEND_FAILED (-0x0908) //-2312, packet sending failed, please check if the network is normal #define OPRT_MID_MQTT_RECV_DATA_FORMAT_WRONG (-0x0909) //-2313, received data format error #define OPRT_MID_MQTT_MSGID_NOT_MATCH (-0x090a) //-2314, received data msgid not found #define OPRT_MID_MQTT_START_TM_MSG_ERR (-0x090b) //-2315, start event msg error #define OPRT_MID_MQTT_OVER_MAX_MESSAGE_LEN (-0x090c) //-2316, over maximum message length #define OPRT_MID_MQTT_PING_SEND_ERR (-0x090d) //-2317, ping send failed, please check if the network is normal #define OPRT_MID_MQTT_PUBLISH_TIMEOUT (-0x090e) //-2318, publish timeout, please check if the network is normal #define OPRT_MID_MQTT_ERRCODE_MAX_CNT 15 /**************************************************************************** the error code marco define for module MID_TLS ****************************************************************************/ #define OPRT_MID_TLS_NET_SOCKET_ERROR (-0x0a00) //-2560, Failed to open a socket #define OPRT_MID_TLS_NET_CONNECT_ERROR (-0x0a01) //-2561, The connection to the given server / port failed. #define OPRT_MID_TLS_UNKNOWN_HOST_ERROR (-0x0a02) //-2562, Failed to get an IP address for the given hostname. #define OPRT_MID_TLS_CONNECTION_ERROR (-0x0a03) //-2563, TLS connection failed, please check if the network is normal #define OPRT_MID_TLS_DRBG_ENTROPY_ERROR (-0x0a04) //-2564, mbedtls random seed generation failed #define OPRT_MID_TLS_X509_ROOT_CRT_PARSE_ERROR (-0x0a05) //-2565, X509 root certificate parsing failed #define OPRT_MID_TLS_X509_DEVICE_CRT_PARSE_ERROR (-0x0a06) //-2566, X509 device certificate parsing failed #define OPRT_MID_TLS_CTR_DRBG_ENTROPY_SOURCE_ERROR (-0x0a07) //-2567, The entropy source failed #define OPRT_MID_TLS_PK_PRIVATE_KEY_PARSE_ERROR (-0x0a08) //-2568, Private key parsing failed #define OPRT_MID_TLS_ERRCODE_MAX_CNT 9 /**************************************************************************** the error code marco define for module SVC_WIFI ****************************************************************************/ #define OPRT_SVC_WIFI_RECV_CONTINUE (-0x0b00) //-2816, Continue receiving the network configuration package #define OPRT_SVC_WIFI_DONOT_FOUND_MODULE (-0x0b01) //-2817, Module not found #define OPRT_SVC_WIFI_PEGASUS_DECODE_FAILED (-0x0b02) //-2818, Lightning package decoding error #define OPRT_SVC_WIFI_NEED_FACTORY_RESET (-0x0b03) //-2819, WiFi initialization configuration verification failed, need to restore factory settings #define OPRT_SVC_WIFI_ERRCODE_MAX_CNT 4 /**************************************************************************** the error code marco define for module SVC_MF_TEST ****************************************************************************/ #define OPRT_SVC_MF_TEST_UPDATE_DATA_LEN_EXECED (-0x0d00) //-3328, Upgrade data length exceeds processing limit #define OPRT_SVC_MF_TEST_UPDATE_CRC_ERROR (-0x0d01) //-3329, Upgrade CRC check failed #define OPRT_SVC_MF_TEST_ERRCODE_MAX_CNT 2 /**************************************************************************** the error code marco define for module SVC_DP ****************************************************************************/ #define OPRT_SVC_DP_ALREADY_PROCESS (-0x0e00) //-3584, DP has been processed #define OPRT_SVC_DP_ID_NOT_FOUND (-0x0e01) //-3585, DP ID not found, please check if the reported DP ID is correct #define OPRT_SVC_DP_TP_NOT_MATCH (-0x0e02) //-3586, DP type does not match, please check if the reported DP type is correct #define OPRT_SVC_DP_DEVICE_NOT_BINDED (-0x0e03) //-3587, Device not bound #define OPRT_SVC_DP_TYPE_PROP_ILLEGAL (-0x0e04) //-3588, Type property illegal, enumeration value does not exist #define OPRT_SVC_DP_NW_INVALID (-0x0e05) //-3589, Network invalid, please check if the network is normal #define OPRT_SVC_DP_SECURITY_VERIFY_ERR (-0x0e06) //-3590, Security verification failed #define OPRT_SVC_DP_REPORT_FINISH (-0x0e07) //-3591, DP report finished #define OPRT_SVC_DP_ERRCODE_MAX_CNT 8 /**************************************************************************** the error code marco define for module BASE_EVENT ****************************************************************************/ #define OPRT_BASE_EVENT_INVALID_EVENT_NAME (-0x0f00) //-3840, Invalid event name #define OPRT_BASE_EVENT_INVALID_EVENT_DESC (-0x0f01) //-3841, Invalid event description #define OPRT_BASE_EVENT_ERRCODE_MAX_CNT 2 /**************************************************************************** the error code marco define for module SVC_TIMER_TASK ****************************************************************************/ #define OPRT_SVC_TIMER_TASK_LOAD_INVALID_CJSON (-0x1000) //-4096, The data saved in K/V is in incorrect JSON format #define OPRT_SVC_TIMER_TASK_LOAD_INVALID_DATA (-0x1001) //-4097, The data saved in K/V lacks the cnt field #define OPRT_SVC_TIMER_TASK_UPDATE_LAST_FETCH_INVALID (-0x1002) //-4098, The data returned by the cloud lacks the lastFetchTime field #define OPRT_SVC_TIMER_TASK_UPDATE_TIMER_CNT_INVALID (-0x1003) //-4099, The data returned by the cloud lacks the count field #define OPRT_SVC_TIMER_TASK_UPDATE_TIMER_CNT_EXCEED (-0x1004) //-4100, The number of timing tasks returned by the cloud exceeds 30 #define OPRT_SVC_TIMER_TASK_ERRCODE_MAX_CNT 5 /**************************************************************************** the error code marco define for module SVC_HTTP ****************************************************************************/ #define OPRT_SVC_HTTP_NOT_ENCRYPT_RET (-0x1100) //-4352, Result not encrypted, please check if you have access permission #define OPRT_SVC_HTTP_FILL_URL_H_ERR (-0x1101) //-4353, Construct header error #define OPRT_SVC_HTTP_FILL_URL_FULL_ERR (-0x1102) //-4354, Construct entire URL error #define OPRT_SVC_HTTP_FILL_DATA_ERR (-0x1103) //-4355, Construct data error #define OPRT_SVC_HTTP_URL_CFG_AI_SPEAKER_ERR (-0x1104) //-4356, AI speaker configuration failed #define OPRT_SVC_HTTP_URL_CFG_URL_ERR (-0x1105) //-4357, httpUrl/mqttUrl field missing #define OPRT_SVC_HTTP_URL_CFG_URL2IP_ERR (-0x1106) //-4358, httpUrl/mqttUrl resolution error #define OPRT_SVC_HTTP_URL_CFG_URL2IP_SELF_ERR (-0x1107) //-4359, httpsSelfUrl/mqttsSelfUrl resolution error #define OPRT_SVC_HTTP_URL_CFG_URL2IP_VERIFY_ERR (-0x1108) //-4360, httpsVerifyUrl/mqttsVerifyUrl resolution error #define OPRT_SVC_HTTP_URL_CFG_URL2IP_PSK_ERR (-0x1109) //-4361, httpsPSKUrl/mqttsPSKUrl resolution error #define OPRT_SVC_HTTP_RECV_ERR (-0x110a) //-4362, Receive data error, please check if the network is normal #define OPRT_SVC_HTTP_RECV_DA_NOT_ENOUGH (-0x110b) //-4363, Received data not enough #define OPRT_SVC_HTTP_API_VERIFY_FAILED (-0x110c) //-4364, Data verification error #define OPRT_SVC_HTTP_GW_NOT_EXIST (-0x110d) //-4365, Gateway information does not exist #define OPRT_SVC_HTTP_API_TOKEN_EXPIRE (-0x110e) //-4366, TOKEN expired #define OPRT_SVC_HTTP_DEV_RESET_FACTORY (-0x110f) //-4367, Device needs to be reset to factory settings #define OPRT_SVC_HTTP_DEV_NEED_REGISTER (-0x1110) //-4368, Device not registered #define OPRT_SVC_HTTP_ORDER_EXPIRE (-0x1111) //-4369, Order expired #define OPRT_SVC_HTTP_NOT_EXISTS (-0x1112) //-4370, Does not exist #define OPRT_SVC_HTTP_SIGNATURE_ERROR (-0x1113) //-4371, Signature error #define OPRT_SVC_HTTP_API_VERSION_WRONG (-0x1114) //-4372, API version wrong #define OPRT_SVC_HTTP_DEVICE_REMOVED (-0x1115) //-4373, Device removed #define OPRT_SVC_HTTP_DEV_ALREADY_BIND (-0x1116) //-4374, Device already bound #define OPRT_SVC_HTTP_REMOTE_API_RUN_UNKNOW_FAILED (-0x1117) //-4375, Unrecognizable API #define OPRT_SVC_HTTP_FORMAT_STRING_FAILED (-0x1118) //-4376, String formatting error #define OPRT_SVC_HTTP_API_DECODE_FAILED (-0x1119) //-4377, Data decryption failed #define OPRT_SVC_HTTP_SERV_VRFY_FAIL (-0x111a) //-4378, Server verification failed #define OPRT_SVC_HTTP_DEVICE_IS_SUB_NODE_OR_IN_ELECTION (-0x111b) //-4379, Dynamic mesh device is in election on the cloud #define OPRT_SVC_HTTP_EXT_MOD_NOT_SUPPORT_AUTO_ACT (-0x111c) //-4380, Extension module does not support automatic activation #define OPRT_SVC_HTTP_ERRCODE_MAX_CNT 29 /**************************************************************************** the error code marco define for module SVC_LAN ****************************************************************************/ #define OPRT_SVC_LAN_SOCKET_FAULT (-0x1500) //-5376, socket error, APP actively disconnected or network abnormal #define OPRT_SVC_LAN_SEND_ERR (-0x1501) //-5377, socket send error, please check if the network is normal #define OPRT_SVC_LAN_NO_CLIENT_CONNECTED (-0x1502) //-5378, no LAN device connections to report #define OPRT_SVC_LAN_ERRCODE_MAX_CNT 3 /**************************************************************************** the error code macro define for module SVC_LAN_LINKAGE ****************************************************************************/ #define OPRT_SVC_LAN_LINKAGE_SOCK_CREAT_ERR (-0x1600) //-5632, socket creation failed #define OPRT_SVC_LAN_LINKAGE_SET_SOCK_ERR (-0x1601) //-5633, socket set failed #define OPRT_SVC_LAN_LINKAGE_SOCK_CONN_ERR (-0x1602) //-5634, socket connection failed, please check if the network is normal #define OPRT_SVC_LAN_LINKAGE_SEND_ERR (-0x1603) //-5635, send failed, please check if the network is normal #define OPRT_SVC_LAN_LINKAGE_RECV_ERR (-0x1604) //-5636, receive failed, please check if the network is normal #define OPRT_SVC_LAN_LINKAGE_ERRCODE_MAX_CNT 5 /**************************************************************************** the error code marco define for module SVC_MQTT ****************************************************************************/ #define OPRT_SVC_MQTT_CMD_NOT_EXEC (-0x1700) //-5888, Command not executed #define OPRT_SVC_MQTT_CMD_OUT_OF_TIME (-0x1701) //-5889, Command not executed within the specified time #define OPRT_SVC_MQTT_GW_MQ_OFFLILNE (-0x1702) //-5890, MQTT offline, please check if the network is normal #define OPRT_SVC_MQTT_ERRCODE_MAX_CNT 3 /**************************************************************************** the error code macro define for module SVC_PEGASUS ****************************************************************************/ #define OPRT_SVC_PEGASUS_DECODE_FAILED (-0x1800) //-6144, Decoding failed #define OPRT_SVC_PEGASUS_DONOT_FOUND_MODULE (-0x1801) //-6145, Module not found #define OPRT_SVC_PEGASUS_ERRCODE_MAX_CNT 2 /**************************************************************************** the error code macro define for module SVC_UPGRADE ****************************************************************************/ #define OPRT_SVC_UPGRADE_APP_NOT_READY (-0x1900) //-6400, Application not ready #define OPRT_SVC_UPGRADE_NO_VALID_FIRMWARE (-0x1901) //-6401, Upgrade information field verification failed #define OPRT_SVC_UPGRADE_LAN_OTA_FINISH (-0x1902) //-6402, LAN OTA completed #define OPRT_SVC_UPGRADE_HMAC_NOT_MATCH (-0x1903) //-6403, HMAC does not match #define OPRT_SVC_UPGRADE_ERRCODE_MAX_CNT 4 /**************************************************************************** the error code macro define for module SVC_API_IOT ****************************************************************************/ #define OPRT_SVC_API_IOT_DISCONNECTED_WITH_ROUTER (-0x1a00) //-6656, Disconnected with router #define OPRT_SVC_API_IOT_DEV_NOT_BIND (-0x1a01) //-6657, Device not bound #define OPRT_SVC_API_IOT_ERRCODE_MAX_CNT 2 /**************************************************************************** the error code marco define for module SVC_CELLULAR ****************************************************************************/ #define OPRT_SVC_CELLULAR_CALL_FAILED (-0x1b00) //-6912, Initiate call failed #define OPRT_SVC_CELLULAR_CALL_VOICE_START_ERR (-0x1b01) //-6913, Start call voice failed #define OPRT_SVC_CELLULAR_CALL_ANSWER_ERR (-0x1b02) //-6914, Call answer failed #define OPRT_SVC_CELLULAR_CALL_GET_INFO_ERR (-0x1b03) //-6915, Get call information failed #define OPRT_SVC_CELLULAR_CALL_HUNGUP_ERR (-0x1b04) //-6916, Call hang up failed #define OPRT_SVC_CELLULAR_SMS_SEND_ERR (-0x1b05) //-6917, SMS send failed #define OPRT_SVC_CELLULAR_SMS_SEND_TIMEOUT (-0x1b06) //-6918, SMS send timeout #define OPRT_SVC_CELLULAR_SMS_ENCODE_ERR (-0x1b07) //-6919, SMS encode error #define OPRT_SVC_CELLULAR_SMS_SIZE_ERR (-0x1b08) //-6920, SMS size error #define OPRT_SVC_CELLULAR_ERRCODE_MAX_CNT 9 /**************************************************************************** the error code marco define for module SVC_DEVOS ****************************************************************************/ #define OPRT_SVC_DEVOS_NOT_EXISTS (-0x1c00) //-7168, Not exists #define OPRT_SVC_DEVOS_SCMA_INVALID (-0x1c01) //-7169, SCMA invalid #define OPRT_SVC_DEVOS_DEV_DP_CNT_INVALID (-0x1c02) //-7170, Device DP count invalid, cannot exceed 255 #define OPRT_SVC_DEVOS_NO_AUTHENTICATION (-0x1c03) //-7171, No authentication #define OPRT_SVC_DEVOS_ROUTER_NOT_FIND (-0x1c04) //-7172, Router not found #define OPRT_SVC_DEVOS_ERRCODE_MAX_CNT 5 /**************************************************************************** the error code marco define for module BASE_DB ****************************************************************************/ #define OPRT_BASE_DB_FLASH_NOT_ENOUGH_PAGE (-0x1d00) //-7424, Not enough flash pages #define OPRT_BASE_DB_ERRCODE_MAX_CNT 1 /**************************************************************************** the error code marco define for module LINK_CORE ****************************************************************************/ #define OPRT_LINK_CORE_NET_SOCKET_ERROR (-0x1e00) //-7680, Failed to open a socket #define OPRT_LINK_CORE_NET_CONNECT_ERROR (-0x1e01) //-7681, The connection to the given server / port failed. #define OPRT_LINK_CORE_UNKNOWN_HOST_ERROR (-0x1e02) //-7682, Failed to get an IP address for the given hostname. #define OPRT_LINK_CORE_TLS_CONNECTION_ERROR (-0x1e03) //-7683, TLS connection failed #define OPRT_LINK_CORE_DRBG_ENTROPY_ERROR (-0x1e04) //-7684, mbedtls random seed generation failed #define OPRT_LINK_CORE_X509_ROOT_CRT_PARSE_ERROR (-0x1e05) //-7685, X509 root certificate parse failed #define OPRT_LINK_CORE_X509_DEVICE_CRT_PARSE_ERROR (-0x1e06) //-7686, X509 device certificate parse failed #define OPRT_LINK_CORE_PK_PRIVATE_KEY_PARSE_ERROR (-0x1e07) //-7687, Private key parse failed #define OPRT_LINK_CORE_HTTP_CLIENT_HEADER_ERROR (-0x1e08) //-7688, HTTP header initialization failed #define OPRT_LINK_CORE_HTTP_CLIENT_SEND_ERROR (-0x1e09) //-7689, HTTP request send failed #define OPRT_LINK_CORE_HTTP_RESPONSE_BUFFER_EMPTY (-0x1e0a) //-7690, HTTP buffer empty #define OPRT_LINK_CORE_HTTP_GW_NOT_EXIST (-0x1e0b) //-7691, Gateway does not exist, the device may have been deleted #define OPRT_LINK_CORE_ERRCODE_MAX_CNT 12 /**************************************************************************** the error code marco define for module SVC_BT ****************************************************************************/ #define OPRT_SVC_BT_API_TRSMITR_CONTINUE (-0x1f00) //-7936, Transmission not finished #define OPRT_SVC_BT_API_TRSMITR_ERROR (-0x1f01) //-7937, Transmission error #define OPRT_SVC_BT_NETCFG_ERROR_ACK (-0x1f02) //-7938, BT command error, send ack to app #define OPRT_SVC_BT_ERRCODE_MAX_CNT 3 /**************************************************************************** the error code macro define for module SVC_NETMGR ****************************************************************************/ #define OPRT_SVC_NETMGR_NEED_FACTORY_RESET (-0x2000) //-8192, Network initialization configuration verification failed, need to restore factory settings #define OPRT_SVC_NETMGR_ERRCODE_MAX_CNT 1 /**************************************************************************** the error code macro define for module GW_BT_DEV ****************************************************************************/ #define OPRT_GW_BT_DEV_BLE_CONNECT_SUCCESS (-0x3100) //-12544, BLE device connected successfully #define OPRT_GW_BT_DEV_BLE_CONNECT_CNT_EXCEED (-0x3101) //-12545, BLE device connection count exceeded the maximum limit #define OPRT_GW_BT_DEV_BLE_CONNECT_HAL_FAILED (-0x3102) //-12546, BLE device connection HAL layer interface returned failure #define OPRT_GW_BT_DEV_BLE_CONNECT_HANDS_FAILED (-0x3103) //-12547, BLE device connection handshake failed #define OPRT_GW_BT_DEV_BLE_CONNECT_HANDS_TIMEOUT (-0x3104) //-12548, BLE device connection handshake timeout, please check if the device is powered on normally, if it is too far away, or if it is connected by a mobile phone's Bluetooth #define OPRT_GW_BT_DEV_BLE_CONNECT_GET_INFO_FAILED (-0x3105) //-12549, BLE device connection get_info failed #define OPRT_GW_BT_DEV_BLE_CONNECT_GET_LOGIN_KEY_FAILED (-0x3106) //-12550, BLE device connection get_login_key failed #define OPRT_GW_BT_DEV_BLE_CONNECT_PAIR_DATA_LEN_ERR (-0x3107) //-12551, BLE device connection pair_data_len_err failed #define OPRT_GW_BT_DEV_BLE_CONNECT_SESSION_OPEN_TIMEOUT (-0x3108) //-12552, BLE device connection session_open timeout #define OPRT_GW_BT_DEV_BLE_CONNECT_SEND_FAILED (-0x3109) //-12553, BLE device connection data send failed #define OPRT_GW_BT_DEV_BLE_LOCAL_RESET (-0x310a) //-12554, BLE device local reset, please confirm if the device has been manually reset #define OPRT_GW_BT_DEV_BLE_SCAN_TIMEOUT (-0x310b) //-12555, BLE device broadcast packet scan timeout, please check if the device is powered on normally, if it is too far away, or if it is connected by a mobile phone's Bluetooth #define OPRT_GW_BT_DEV_BLE_DISCONNECT_SUCCESS (-0x310c) //-12556, BLE device disconnected successfully #define OPRT_GW_BT_DEV_BEACON_DEV_NOT_FOUND (-0x310d) //-12557, Device not found #define OPRT_GW_BT_DEV_BEACON_DEV_KEY1_NOT_FOUND (-0x310e) //-12558, Device KEY1 not found, the key for communication data encryption #define OPRT_GW_BT_DEV_BEACON_DEV_NOT_BIND (-0x310f) //-12559, Device not bound, please rebind the device #define OPRT_GW_BT_DEV_BEACON_DECODE_PAIR_MSG_FAILED (-0x3110) //-12560, Device networking, gateway requests cloud to decrypt networking information failed #define OPRT_GW_BT_DEV_BEACON_KEY_RESP_TIMEOUT (-0x3111) //-12561, Device networking, device beaconkey response timeout #define OPRT_GW_BT_DEV_BEACON_JOIN_NOTIFY_RESP_TIMEOUT (-0x3112) //-12562, Device networking, device join notify response timeout #define OPRT_GW_BT_DEV_ERRCODE_MAX_CNT 19 /**************************************************************************** the error code marco define for module GW_ZG_DEV ****************************************************************************/ #define OPRT_GW_ZG_DEV_ZB_HOST_TABLE_NULL (-0x3200) //-12800, The device does not exist in the host table and will be removed. The gateway has not stored information about this device. #define OPRT_GW_ZG_DEV_ZB_SEQ_INVALID (-0x3201) //-12801, ZCL seq is invalid, the seq of the current packet is less than the seq of the previous packet. #define OPRT_GW_ZG_DEV_ZB_HOST_TO_GATEWAY_ERR (-0x3202) //-12802, Error sending data from the host to the gateway component, local UDP data transmission error, it is recommended to restart the gateway. #define OPRT_GW_ZG_DEV_ZB_DATA_TOO_BIG (-0x3203) //-12803, The length of Zigbee data is too large and has been discarded, it is recommended to check the data format. #define OPRT_GW_ZG_DEV_ZB_GW_TABLE_NULL (-0x3204) //-12804, The gateway device table is not initialized, it is recommended to retry networking. #define OPRT_GW_ZG_DEV_ZB_GW_RELIABLE_ERR (-0x3205) //-12805, Reliable reporting failed, it is recommended to check the data format. #define OPRT_GW_ZG_DEV_ZB_GW_TRD_DEV_ERR (-0x3206) //-12806, Third-level device data reporting failed, it is recommended to check the data format. #define OPRT_GW_ZG_DEV_ZB_GATEWAY_DEV_ID_ERR (-0x3207) //-12807, The device id for data distribution does not exist, it is recommended to re-network. #define OPRT_GW_ZG_DEV_ZB_GATEWAY_UPDATE_SCE_LIST_ERR (-0x3208) //-12808, The scene list for data distribution does not exist, it may not have verified that dp, it is recommended to recreate the scene. #define OPRT_GW_ZG_DEV_ZB_GATEWAY_MALLOC_ERR (-0x3209) //-12809, GATEWAY layer memory allocation failed, insufficient memory, it is recommended to restart the gateway. #define OPRT_GW_ZG_DEV_ZB_GATEWAY_DATA_TYPE_ERR (-0x320a) //-12810, Data distribution DP data type error, check the data format. #define OPRT_GW_ZG_DEV_ZB_GATEWAY_TRD_DEV_DW_ERR (-0x320b) //-12811, Third-level device data distribution failed, check the data format. #define OPRT_GW_ZG_DEV_ZB_GATEWAY_COM_DATALEN_ERR (-0x320c) //-12812, General docking data length error, check the data format. #define OPRT_GW_ZG_DEV_ZB_GATEWAY_SEND_DATA_FAILED (-0x320d) //-12813, GATEWAY layer failed to send data to HOST layer, check the data format. #define OPRT_GW_ZG_DEV_ZB_GATEWAY_NCRYPT_DATA_FAILED (-0x320e) //-12814, Data encryption failed. #define OPRT_GW_ZG_DEV_ZB_GATWAY_STDRELIABLE_DW_FAILED (-0x320f) //-12815, Standard transparent command sending failed, check the data format. #define OPRT_GW_ZG_DEV_ZB_GATWAY_CMD_TYPE_NOT_SUPPORT (-0x3210) //-12816, The command type for distribution is not supported, check the data format. #define OPRT_GW_ZG_DEV_ZB_HOST_RCV_SLABSCMD_MSG_LEN_ERR (-0x3211) //-12817, Data packet length error for distribution, check the data format. #define OPRT_GW_ZG_DEV_ZB_HSOT_DEV_REJOIN (-0x3212) //-12818, When distributing data, the device is in the rejoin process, it is recommended to wait and retry. #define OPRT_GW_ZG_DEV_ZB_HOST_CMD_TYPE_NOT_SUPPORT (-0x3213) //-12819, Host command type is not supported, check the data format. #define OPRT_GW_ZG_DEV_ZB_HOST_SEND_DATA_FAILED (-0x3214) //-12820, Host layer failed to send data, it is recommended to retry. #define OPRT_GW_ZG_DEV_ZB_GATEWAY_DEV_BIND_ERR (-0x3215) //-12821, Binding error, it is recommended to re-network. #define OPRT_GW_ZG_DEV_ZB_GATEWAY_SET_HB_STAT_FAILED (-0x3216) //-12822, GATEWAY layer failed to set sub-device heartbeat status, the device may not be adapted. #define OPRT_GW_ZG_DEV_ZB_GATEWAY_JOIN_STAT_FALSE (-0x3217) //-12823, The gateway has not enabled networking, ensure the gateway is in networking mode. #define OPRT_GW_ZG_DEV_ZB_GATEWAY_STAND_JOIN_ERR (-0x3218) //-12824, Standard networking failed, the device may not be adapted. #define OPRT_GW_ZG_DEV_ZB_GATEWAY_DEV_NOT_SUPPORT (-0x3219) //-12825, Sub-device is not supported, the device may not be adapted. #define OPRT_GW_ZG_DEV_ZB_HOST_RCV_JOIN_MSG_ERR (-0x321a) //-12826, Zigbee host layer received MSG length abnormal, check the data format. #define OPRT_GW_ZG_DEV_ZB_GATEWAY_TRD_DEVID_ERR (-0x321b) //-12827, Third-level device ID error, it is recommended to re-network. #define OPRT_GW_ZG_DEV_ZB_GATEWAY_THR_DEV_TPE_ERR (-0x321c) //-12828, Third-level device type error, it is recommended to re-network. #define OPRT_GW_ZG_DEV_ZB_GATEWAY_RS_PROFILE_NOT_SUPPORT (-0x321d) //-12829, Receiving ZIGBEE PROFILE not supported, the device may not be adapted. #define OPRT_GW_ZG_DEV_ZB_SUBDEV_LEAVE_SELF (-0x321e) //-12830, Sub-device actively leaves the network, the device may have been reset. #define OPRT_GW_ZG_DEV_ERRCODE_MAX_CNT 31 /**************************************************************************** the error code marco define for module GW_BASE_LINKAGE ****************************************************************************/ #define OPRT_GW_BASE_LINKAGE_INIT_FAIL (-0x3300) //-13056, Linkage module initialization failed. #define OPRT_GW_BASE_LINKAGE_COND_CHECK_FAIL (-0x3301) //-13057, Linkage condition not met. #define OPRT_GW_BASE_LINKAGE_RULE_ID_NOT_FIND (-0x3302) //-13058, Linkage rule ID does not exist, please check if the rule exists. #define OPRT_GW_BASE_LINKAGE_RULE_ID_DISABLE (-0x3303) //-13059, Linkage rule is not enabled, please check if the rule is enabled. #define OPRT_GW_BASE_LINKAGE_RULE_IS_UPDATED (-0x3304) //-13060, Linkage rule is being updated, please try again later. #define OPRT_GW_BASE_LINKAGE_FLOW_CNTL (-0x3305) //-13061, Linkage flow control, may trigger too frequently, please try again later, or there may be a dead loop, please check if there is a dead loop in the linkage. #define OPRT_GW_BASE_LINKAGE_THREAD_CREATE_FAIL (-0x3306) //-13062, Linkage thread creation failed. #define OPRT_GW_BASE_LINKAGE_COND_CHECK_NO_ID_MATCH (-0x3307) //-13063, Linkage condition not met (no matching device ID). #define OPRT_GW_BASE_LINKAGE_COND_CHECK_NO_DP_MATCH (-0x3308) //-13064, Linkage condition not met (no matching condition DP). #define OPRT_GW_BASE_LINKAGE_ERRCODE_MAX_CNT 9 /**************************************************************************** the error code marco define for module GW_ZG_SUB ****************************************************************************/ #define OPRT_GW_ZG_SUB_ERR0 (-0x3400) //-13312, Error 0 #define OPRT_GW_ZG_SUB_ERR1 (-0x3401) //-13313, Error 1 #define OPRT_GW_ZG_SUB_ERR2 (-0x3402) //-13314, Error 2: FIB restart #define OPRT_GW_ZG_SUB_ERR3 (-0x3403) //-13315, Error 3: Upgrade restart #define OPRT_GW_ZG_SUB_ERR4 (-0x3404) //-13316, Error 4: External IO exception restart #define OPRT_GW_ZG_SUB_ERR5 (-0x3405) //-13317, Error 5: Low voltage restart, may be power failure restart, or power supply problem #define OPRT_GW_ZG_SUB_ERR6 (-0x3406) //-13318, Error 6: Watchdog restart #define OPRT_GW_ZG_SUB_ERR7 (-0x3407) //-13319, Error 7: Software initiated restart #define OPRT_GW_ZG_SUB_ERR8 (-0x3408) //-13320, Error 8: Software crash restart #define OPRT_GW_ZG_SUB_ERR9 (-0x3409) //-13321, Error 9: Flash exception restart #define OPRT_GW_ZG_SUB_ERR10 (-0x340a) //-13322, Error 10: Irrecoverable hardware exception restart #define OPRT_GW_ZG_SUB_ERR11 (-0x340b) //-13323, Error 11: Internal CPU access error in hardware #define OPRT_GW_ZG_SUB_ERR12 (-0x340c) //-13324, Error 12: Power-off restart, may be power failure restart, or power supply problem #define OPRT_GW_ZG_SUB_ERR13 (-0x340d) //-13325, Error 13 #define OPRT_GW_ZG_SUB_ERR14 (-0x340e) //-13326, Error 14 #define OPRT_GW_ZG_SUB_ERR15 (-0x340f) //-13327, Error 15 #define OPRT_GW_ZG_SUB_ERR16 (-0x3410) //-13328, Error 16: Restart #define OPRT_GW_ZG_SUB_ERR17 (-0x3411) //-13329, Error 17: Disconnection #define OPRT_GW_ZG_SUB_ERR18 (-0x3412) //-13330, Error 18: Active disconnection, please check if the customer triggered the disconnection locally #define OPRT_GW_ZG_SUB_ERR19 (-0x3413) //-13331, Error 19: Passive disconnection, please check if it was removed by APP or remote control #define OPRT_GW_ZG_SUB_ERR20 (-0x3414) //-13332, Error 20: IO exception #define OPRT_GW_ZG_SUB_ERR21 (-0x3415) //-13333, Error 21: Memory leak #define OPRT_GW_ZG_SUB_ERR22 (-0x3416) //-13334, Error 22: Short address change #define OPRT_GW_ZG_SUB_ERR23 (-0x3417) //-13335, Error 23: Received factory reset #define OPRT_GW_ZG_SUB_ERR24 (-0x3418) //-13336, Error 24: Received F0 command #define OPRT_GW_ZG_SUB_ERR25 (-0x3419) //-13337, Error 25: Wake-up time too long #define OPRT_GW_ZG_SUB_ERR26 (-0x341a) //-13338, Error 26: Received abnormal factory reset #define OPRT_GW_ZG_SUB_ERRCODE_MAX_CNT 27 /**************************************************************************** the error code macro define for module OS_ADAPTER_MUTEX ****************************************************************************/ #define OPRT_OS_ADAPTER_MUTEX_CREAT_FAILED (-0x6500) //-25856, Creation failed #define OPRT_OS_ADAPTER_MUTEX_LOCK_FAILED (-0x6501) //-25857, Lock failed #define OPRT_OS_ADAPTER_MUTEX_UNLOCK_FAILED (-0x6502) //-25858, Unlock failed #define OPRT_OS_ADAPTER_MUTEX_RELEASE_FAILED (-0x6503) //-25859, Release failed #define OPRT_OS_ADAPTER_MUTEX_ERRCODE_MAX_CNT 4 /**************************************************************************** the error code macro define for module OS_ADAPTER_SEM ****************************************************************************/ #define OPRT_OS_ADAPTER_SEM_CREAT_FAILED (-0x6600) //-26112, Creation failed #define OPRT_OS_ADAPTER_SEM_WAIT_FAILED (-0x6601) //-26113, Wait failed #define OPRT_OS_ADAPTER_SEM_POST_FAILED (-0x6602) //-26114, Post failed #define OPRT_OS_ADAPTER_SEM_RELEASE_FAILED (-0x6603) //-26115, Release failed #define OPRT_OS_ADAPTER_SEM_WAIT_TIMEOUT (-0x6604) //-26116, Wait timeout #define OPRT_OS_ADAPTER_SEM_ERRCODE_MAX_CNT 5 /**************************************************************************** the error code macro define for module OS_ADAPTER_QUEUE ****************************************************************************/ #define OPRT_OS_ADAPTER_QUEUE_CREAT_FAILED (-0x6700) //-26368, Creation failed #define OPRT_OS_ADAPTER_QUEUE_SEND_FAIL (-0x6701) //-26369, Send failed #define OPRT_OS_ADAPTER_QUEUE_RECV_FAIL (-0x6702) //-26370, Receive failed #define OPRT_OS_ADAPTER_QUEUE_ERRCODE_MAX_CNT 3 /**************************************************************************** the error code macro define for module OS_ADAPTER_THRD ****************************************************************************/ #define OPRT_OS_ADAPTER_THRD_CREAT_FAILED (-0x6800) //-26624, Creation failed #define OPRT_OS_ADAPTER_THRD_RELEASE_FAILED (-0x6801) //-26625, Release failed #define OPRT_OS_ADAPTER_THRD_JUDGE_SELF_FAILED (-0x6802) //-26626, Judge self failed #define OPRT_OS_ADAPTER_THRD_ERRCODE_MAX_CNT 3 /**************************************************************************** the error code marco define for module OS_ADAPTER ****************************************************************************/ #define OPRT_OS_ADAPTER_COM_ERROR (-0x6900) //-26880, General exception #define OPRT_OS_ADAPTER_INVALID_PARM (-0x6901) //-26881, Invalid parameter #define OPRT_OS_ADAPTER_MALLOC_FAILED (-0x6902) //-26882, Memory allocation failed #define OPRT_OS_ADAPTER_NOT_SUPPORTED (-0x6903) //-26883, Operation not supported #define OPRT_OS_ADAPTER_NETWORK_ERROR (-0x6904) //-26884, Network error #define OPRT_OS_ADAPTER_AP_NOT_FOUND (-0x6905) //-26885, AP not found #define OPRT_OS_ADAPTER_AP_SCAN_FAILED (-0x6906) //-26886, AP scan failed #define OPRT_OS_ADAPTER_AP_RELEASE_FAILED (-0x6907) //-26887, AP release failed #define OPRT_OS_ADAPTER_CHAN_SET_FAILED (-0x6908) //-26888, Channel set failed #define OPRT_OS_ADAPTER_CHAN_GET_FAILED (-0x6909) //-26889, Channel get failed #define OPRT_OS_ADAPTER_IP_GET_FAILED (-0x690a) //-26890, IP get failed #define OPRT_OS_ADAPTER_MAC_SET_FAILED (-0x690b) //-26891, MAC set failed #define OPRT_OS_ADAPTER_MAC_GET_FAILED (-0x690c) //-26892, MAC get failed #define OPRT_OS_ADAPTER_WORKMODE_SET_FAILED (-0x690d) //-26893, Work mode set failed #define OPRT_OS_ADAPTER_WORKMODE_GET_FAILED (-0x690e) //-26894, Work mode get failed #define OPRT_OS_ADAPTER_SNIFFER_SET_FAILED (-0x690f) //-26895, SNIFFER set failed #define OPRT_OS_ADAPTER_AP_START_FAILED (-0x6910) //-26896, AP start failed #define OPRT_OS_ADAPTER_AP_STOP_FAILED (-0x6911) //-26897, AP stop failed #define OPRT_OS_ADAPTER_APINFO_GET_FAILED (-0x6912) //-26898, AP info get failed #define OPRT_OS_ADAPTER_FAST_CONN_FAILED (-0x6913) //-26899, Fast connect failed #define OPRT_OS_ADAPTER_CONN_FAILED (-0x6914) //-26900, Connect failed #define OPRT_OS_ADAPTER_DISCONN_FAILED (-0x6915) //-26901, Disconnect failed #define OPRT_OS_ADAPTER_RSSI_GET_FAILED (-0x6916) //-26902, RSSI get failed #define OPRT_OS_ADAPTER_BSSID_GET_FAILED (-0x6917) //-26903, BSSID get failed #define OPRT_OS_ADAPTER_STAT_GET_FAILED (-0x6918) //-26904, Status get failed #define OPRT_OS_ADAPTER_CCODE_SET_FAILE (-0x6919) //-26905, CCODE set failed #define OPRT_OS_ADAPTER_MGNT_SEND_FAILED (-0x691a) //-26906, Management packet send failed #define OPRT_OS_ADAPTER_MGNT_REG_FAILED (-0x691b) //-26907, Management packet callback registration failed #define OPRT_OS_ADAPTER_WF_LPMODE_SET_FAILED (-0x691c) //-26908, Wi-Fi low power mode set failed #define OPRT_OS_ADAPTER_CPU_LPMODE_SET_FAILED (-0x691d) //-26909, CPU low power mode set failed #define OPRT_OS_ADAPTER_ERRCODE_MAX_CNT 30 /**************************************************************************** the error code macro define for module OS_ADAPTER_FLASH ****************************************************************************/ #define OPRT_OS_ADAPTER_FLASH_READ_FAILED (-0x6a00) //-27136, Flash read failed #define OPRT_OS_ADAPTER_FLASH_WRITE_FAILED (-0x6a01) //-27137, Flash write failed #define OPRT_OS_ADAPTER_FLASH_ERASE_FAILED (-0x6a02) //-27138, Flash erase failed #define OPRT_OS_ADAPTER_FLASH_ERRCODE_MAX_CNT 3 /**************************************************************************** the error code macro define for module OS_ADAPTER_OTA ****************************************************************************/ #define OPRT_OS_ADAPTER_OTA_START_INFORM_FAILED (-0x6b00) //-27392, OTA start notification failed #define OPRT_OS_ADAPTER_OTA_PKT_SIZE_FAILED (-0x6b01) //-27393, OTA packet size invalid #define OPRT_OS_ADAPTER_OTA_PROCESS_FAILED (-0x6b02) //-27394, OTA process failed #define OPRT_OS_ADAPTER_OTA_VERIFY_FAILED (-0x6b03) //-27395, OTA verify failed #define OPRT_OS_ADAPTER_OTA_END_INFORM_FAILED (-0x6b04) //-27396, OTA end notification failed #define OPRT_OS_ADAPTER_OTA_ERRCODE_MAX_CNT 5 /**************************************************************************** the error code macro define for module OS_ADAPTER_WD ****************************************************************************/ #define OPRT_OS_ADAPTER_WD_WD_INIT_FAILED (-0x6c00) //-27648, Watchdog initialization failed #define OPRT_OS_ADAPTER_WD_ERRCODE_MAX_CNT 1 /**************************************************************************** the error code marco define for module OS_ADAPTER_GPIO ****************************************************************************/ #define OPRT_OS_ADAPTER_GPIO_INOUT_SET_FAILED (-0x6d00) //-27904, GPIO INOUT setting failed #define OPRT_OS_ADAPTER_GPIO_MODE_SET_FAILED (-0x6d01) //-27905, GPIO mode setting failed #define OPRT_OS_ADAPTER_GPIO_WRITE_FAILED (-0x6d02) //-27906, GPIO write failed #define OPRT_OS_ADAPTER_GPIO_IRQ_INIT_FAILED (-0x6d03) //-27907, GPIO interrupt initialization failed #define OPRT_OS_ADAPTER_GPIO_ERRCODE_MAX_CNT 4 /**************************************************************************** the error code macro define for module OS_ADAPTER_UART ****************************************************************************/ #define OPRT_OS_ADAPTER_UART_INIT_FAILED (-0x6e00) //-28160, UART initialization failed #define OPRT_OS_ADAPTER_UART_DEINIT_FAILED (-0x6e01) //-28161, UART release failed #define OPRT_OS_ADAPTER_UART_SEND_FAILED (-0x6e02) //-28162, UART send failed #define OPRT_OS_ADAPTER_UART_READ_FAILED (-0x6e03) //-28163, UART receive failed #define OPRT_OS_ADAPTER_UART_ERRCODE_MAX_CNT 4 /**************************************************************************** the error code macro define for module OS_ADAPTER_I2C ****************************************************************************/ #define OPRT_OS_ADAPTER_I2C_OPEN_FAILED (-0x6f00) //-28416, I2C open failed #define OPRT_OS_ADAPTER_I2C_CLOSE_FAILED (-0x6f01) //-28417, I2C close failed #define OPRT_OS_ADAPTER_I2C_READ_FAILED (-0x6f02) //-28418, I2C read failed #define OPRT_OS_ADAPTER_I2C_WRITE_FAILED (-0x6f03) //-28419, I2C write failed #define OPRT_OS_ADAPTER_I2C_INVALID_PARM (-0x6f04) //-28420, Invalid parameter #define OPRT_OS_ADAPTER_I2C_INIT_FAILED (-0x6f05) //-28421, Initialization failed #define OPRT_OS_ADAPTER_I2C_DEINIT_FAILED (-0x6f06) //-28422, Release failed #define OPRT_OS_ADAPTER_I2C_MODE_ERR (-0x6f07) //-28423, Mode error #define OPRT_OS_ADAPTER_I2C_BUSY (-0x6f08) //-28424, Busy #define OPRT_OS_ADAPTER_I2C_TIMEOUT (-0x6f09) //-28425, Timeout #define OPRT_OS_ADAPTER_I2C_MASTER_LOST_ARB (-0x6f0a) //-28426, Master arbitration lost #define OPRT_OS_ADAPTER_I2C_BUS_ERR (-0x6f0b) //-28427, Bus error #define OPRT_OS_ADAPTER_I2C_TRANS_ERR (-0x6f0c) //-28428, Transmission error #define OPRT_OS_ADAPTER_I2C_ADDR_NO_ACK (-0x6f0d) //-28429, No ACK #define OPRT_OS_ADAPTER_I2C_IRQ_INIT_FAILED (-0x6f0e) //-28430, Interrupt initialization failed #define OPRT_OS_ADAPTER_I2C_RESERVE1_ERR (-0x6f0f) //-28431, RESERVE ERR1 #define OPRT_OS_ADAPTER_I2C_RESERVE2_ERR (-0x6f10) //-28432, RESERVE ERR2 #define OPRT_OS_ADAPTER_I2C_RESERVE3_ERR (-0x6f11) //-28433, RESERVE ERR3 #define OPRT_OS_ADAPTER_I2C_ERRCODE_MAX_CNT 18 /**************************************************************************** the error code macro define for module OS_ADAPTER_BLE ****************************************************************************/ #define OPRT_OS_ADAPTER_BLE_HANDLE_ERROR (-0x7000) //-28672, Ble handle error #define OPRT_OS_ADAPTER_BLE_BUSY (-0x7001) //-28673, Ble busy #define OPRT_OS_ADAPTER_BLE_TIMEOUT (-0x7002) //-28674, Ble timeout #define OPRT_OS_ADAPTER_BLE_RESERVED1 (-0x7003) //-28675, Ble Reserved Error Code 1 #define OPRT_OS_ADAPTER_BLE_RESERVED2 (-0x7004) //-28676, Ble Reserved Error Code 2 #define OPRT_OS_ADAPTER_BLE_RESERVED3 (-0x7005) //-28677, Ble Reserved Error Code 3 #define OPRT_OS_ADAPTER_BLE_INIT_FAILED (-0x7006) //-28678, Ble initialization failed #define OPRT_OS_ADAPTER_BLE_DEINIT_FAILED (-0x7007) //-28679, Ble release failed #define OPRT_OS_ADAPTER_BLE_GATT_CONN_FAILED (-0x7008) //-28680, Ble GATT connection failed #define OPRT_OS_ADAPTER_BLE_GATT_DISCONN_FAILED (-0x7009) //-28681, Ble GATT disconnection failed #define OPRT_OS_ADAPTER_BLE_ADV_START_FAILED (-0x700a) //-28682, Ble advertisement start failed #define OPRT_OS_ADAPTER_BLE_ADV_STOP_FAILED (-0x700b) //-28683, Ble advertisement stop failed #define OPRT_OS_ADAPTER_BLE_SCAN_START_FAILED (-0x700c) //-28684, Ble scan start failed #define OPRT_OS_ADAPTER_BLE_SCAN_STAOP_FAILED (-0x700d) //-28685, Ble scan stop failed #define OPRT_OS_ADAPTER_BLE_SVC_DISC_FAILED (-0x700e) //-28686, Ble service discovery failed #define OPRT_OS_ADAPTER_BLE_CHAR_DISC_FAILED (-0x700f) //-28687, Ble characteristic discovery failed #define OPRT_OS_ADAPTER_BLE_DESC_DISC_FAILED (-0x7010) //-28688, Ble descriptor discovery failed #define OPRT_OS_ADAPTER_BLE_NOTIFY_FAILED (-0x7011) //-28689, Ble Peripheral Notify failed #define OPRT_OS_ADAPTER_BLE_INDICATE_FAILED (-0x7012) //-28690, Ble Peripheral Indicate failed #define OPRT_OS_ADAPTER_BLE_WRITE_FAILED (-0x7013) //-28691, Ble Central write failed #define OPRT_OS_ADAPTER_BLE_READ_FAILED (-0x7014) //-28692, Ble Central read failed #define OPRT_OS_ADAPTER_BLE_MTU_REQ_FAILED (-0x7015) //-28693, Ble Central MTU request failed #define OPRT_OS_ADAPTER_BLE_MTU_REPLY_FAILED (-0x7016) //-28694, Ble Peripheral MTU response failed #define OPRT_OS_ADAPTER_BLE_CONN_PARAM_UPDATE_FAILED (-0x7017) //-28695, Ble connection parameter update failed #define OPRT_OS_ADAPTER_BLE_CONN_RSSI_GET_FAILED (-0x7018) //-28696, Ble connection RSSI get failed #define OPRT_OS_ADAPTER_BLE_MESH_INVALID_OPCODE (-0x7019) //-28697, Ble Mesh invalid opcode #define OPRT_OS_ADAPTER_BLE_MESH_INVALID_ELEMENT (-0x701a) //-28698, Ble Mesh invalid element #define OPRT_OS_ADAPTER_BLE_MESH_INVALID_MODEL (-0x701b) //-28699, Ble Mesh invalid model #define OPRT_OS_ADAPTER_BLE_MESH_INVALID_ADDR (-0x701c) //-28700, Ble Mesh invalid source, virtual or destination address #define OPRT_OS_ADAPTER_BLE_MESH_INVALID_INDEX (-0x701d) //-28701, Ble Mesh invalid index, e.g., appkey index, netkey index, etc. #define OPRT_OS_ADAPTER_BLE_MESH_NO_MEMORY (-0x701e) //-28702, Ble Mesh no memory, e.g., sending too fast causing excessive buffering #define OPRT_OS_ADAPTER_BLE_MESH_APPKEY_NOT_BOUND_MODEL (-0x701f) //-28703, Ble Mesh Appkey not bound error #define OPRT_OS_ADAPTER_BLE_MESH_RESERVED1 (-0x7020) //-28704, Ble Mesh Reserved Error Code 1 #define OPRT_OS_ADAPTER_BLE_MESH_RESERVED2 (-0x7021) //-28705, Ble Mesh Reserved Error Code 2 #define OPRT_OS_ADAPTER_BLE_MESH_RESERVED3 (-0x7022) //-28706, Ble Mesh Reserved Error Code 3 #define OPRT_OS_ADAPTER_BLE_MESH_RESERVED4 (-0x7023) //-28707, Ble Mesh Reserved Error Code 4 #define OPRT_OS_ADAPTER_BLE_MESH_RESERVED5 (-0x7024) //-28708, Ble Mesh Reserved Error Code 5 #define OPRT_OS_ADAPTER_BLE_MESH_PROVISION_FAIL (-0x7025) //-28709, Ble Mesh provisioning failed #define OPRT_OS_ADAPTER_BLE_MESH_COMPO_GET_FAIL (-0x7026) //-28710, Ble Mesh Composition data get failed #define OPRT_OS_ADAPTER_BLE_MESH_MODEL_BIND_FAIL (-0x7027) //-28711, Ble Mesh model bind failed #define OPRT_OS_ADAPTER_BLE_MESH_APPKEY_ADD_FAIL (-0x7028) //-28712, Ble Mesh Appkey add failed #define OPRT_OS_ADAPTER_BLE_MESH_NETKEY_ADD_FAIL (-0x7029) //-28713, Ble Mesh Netkey add failed #define OPRT_OS_ADAPTER_BLE_MESH_APPKEY_BIND_FAIL (-0x702a) //-28714, Ble Mesh Appkey bind failed #define OPRT_OS_ADAPTER_BLE_ERRCODE_MAX_CNT 43 /**************************************************************************** the error code marco define for module MID_TRANSPORT ****************************************************************************/ #define OPRT_MID_TRANSPORT_INVALID_PARM (-0x7100) //-28928, Invalid parameter #define OPRT_MID_TRANSPORT_MALLOC_FAILED (-0x7101) //-28929, Memory allocation failed #define OPRT_MID_TRANSPORT_DNS_PARSED_FAILED (-0x7102) //-28930, DNS parsing failed, please check if the network is normal #define OPRT_MID_TRANSPORT_SOCK_CREAT_FAILED (-0x7103) //-28931, Socket creation failed, please check if the socket configuration quantity is too small #define OPRT_MID_TRANSPORT_SOCK_SET_REUSE_FAILED (-0x7104) //-28932, Socket set reuse failed #define OPRT_MID_TRANSPORT_SOCK_SET_DISABLE_NAGLE_FAILED (-0x7105) //-28933, Socket set disable nagle failed #define OPRT_MID_TRANSPORT_SOCK_SET_KEEP_ALIVE_FAILED (-0x7106) //-28934, Socket set keep alive failed #define OPRT_MID_TRANSPORT_SOCK_SET_BLOCK_FAILED (-0x7107) //-28935, Socket set block failed #define OPRT_MID_TRANSPORT_SOCK_NET_BIND_FAILED (-0x7108) //-28936, Socket net bind failed #define OPRT_MID_TRANSPORT_SOCK_SET_TIMEOUT_FAILED (-0x7109) //-28937, Socket set timeout failed #define OPRT_MID_TRANSPORT_TCP_CONNECD_FAILED (-0x710a) //-28938, TCP connection failed, please check if the network is normal #define OPRT_MID_TRANSPORT_TCP_TLS_CONNECD_FAILED (-0x710b) //-28939, TCP TLS connection failed, please check if the network is normal #define OPRT_MID_TRANSPORT_PACK_SEND_FAILED (-0x710c) //-28940, Packet sending failed, please check if the network is normal #define OPRT_MID_TRANSPORT_ERRCODE_MAX_CNT 13 /**************************************************************************** the error code macro define for module OS_ADAPTER_SPI ****************************************************************************/ #define OPRT_OS_ADAPTER_SPI_INVALID_PARM (-0x7200) //-29184, Invalid parameter #define OPRT_OS_ADAPTER_SPI_INIT_FAILED (-0x7201) //-29185, Initialization failed #define OPRT_OS_ADAPTER_SPI_DEINIT_FAILED (-0x7202) //-29186, Deinitialization failed #define OPRT_OS_ADAPTER_SPI_MODE_ERR (-0x7203) //-29187, Mode error #define OPRT_OS_ADAPTER_SPI_BUSY (-0x7204) //-29188, Busy #define OPRT_OS_ADAPTER_SPI_DATA_LOST (-0x7205) //-29189, Data lost #define OPRT_OS_ADAPTER_SPI_TIMEOUT (-0x7206) //-29190, Timeout #define OPRT_OS_ADAPTER_SPI_BUS_ERR (-0x7207) //-29191, Bus error #define OPRT_OS_ADAPTER_SPI_TRANS_ERR (-0x7208) //-29192, Transmission error #define OPRT_OS_ADAPTER_SPI_IRQ_ERR (-0x7209) //-29193, Interrupt exception #define OPRT_OS_ADAPTER_SPI_RESERVE1_ERR (-0x720a) //-29194, RESERVE ERR1 #define OPRT_OS_ADAPTER_SPI_RESERVE2_ERR (-0x720b) //-29195, RESERVE ERR2 #define OPRT_OS_ADAPTER_SPI_RESERVE3_ERR (-0x720c) //-29196, RESERVE ERR3 #define OPRT_OS_ADAPTER_SPI_ERRCODE_MAX_CNT 13 /**************************************************************************** the error code macro define for module OS_ADAPTER_PWM ****************************************************************************/ #define OPRT_OS_ADAPTER_PWM_INVALID_PARM (-0x7300) //-29440, Invalid parameter #define OPRT_OS_ADAPTER_PWM_INIT_FAILED (-0x7301) //-29441, Initialization failed #define OPRT_OS_ADAPTER_PWM_DEINIT_FAILED (-0x7302) //-29442, Deinitialization failed #define OPRT_OS_ADAPTER_PWM_MODE_ERR (-0x7303) //-29443, Mode error #define OPRT_OS_ADAPTER_PWM_BUSY (-0x7304) //-29444, Busy #define OPRT_OS_ADAPTER_PWM_IRQ_INIT_FAILED (-0x7305) //-29445, Interrupt initialization failed #define OPRT_OS_ADAPTER_PWM_RESERVE1_ERR (-0x7306) //-29446, RESERVE ERR1 #define OPRT_OS_ADAPTER_PWM_RESERVE2_ERR (-0x7307) //-29447, RESERVE ERR2 #define OPRT_OS_ADAPTER_PWM_RESERVE3_ERR (-0x7308) //-29448, RESERVE ERR3 #define OPRT_OS_ADAPTER_PWM_ERRCODE_MAX_CNT 9 /**************************************************************************** the error code macro define for module OS_ADAPTER_ADC ****************************************************************************/ #define OPRT_OS_ADAPTER_ADC_INVALID_PARM (-0x7400) //-29696, Invalid parameter #define OPRT_OS_ADAPTER_ADC_INIT_FAILED (-0x7401) //-29697, Initialization failed #define OPRT_OS_ADAPTER_ADC_DEINIT_FAILED (-0x7402) //-29698, Deinitialization failed #define OPRT_OS_ADAPTER_ADC_READ_FAILED (-0x7403) //-29699, ADC read failed #define OPRT_OS_ADAPTER_ADC_MODE_ERR (-0x7404) //-29700, Mode error #define OPRT_OS_ADAPTER_ADC_BUSY (-0x7405) //-29701, Busy #define OPRT_OS_ADAPTER_ADC_TIMEOUT (-0x7406) //-29702, Timeout #define OPRT_OS_ADAPTER_ADC_IRQ_INIT_FAILED (-0x7407) //-29703, Interrupt initialization failed #define OPRT_OS_ADAPTER_ADC_RESERVE1_ERR (-0x7408) //-29704, RESERVE ERR1 #define OPRT_OS_ADAPTER_ADC_RESERVE2_ERR (-0x7409) //-29705, RESERVE ERR2 #define OPRT_OS_ADAPTER_ADC_RESERVE3_ERR (-0x740a) //-29706, RESERVE ERR3 #define OPRT_OS_ADAPTER_ADC_ERRCODE_MAX_CNT 11 /**************************************************************************** the error code macro define for module OS_ADAPTER_DAC ****************************************************************************/ #define OPRT_OS_ADAPTER_DAC_INVALID_PARM (-0x7500) //-29952, Invalid parameter #define OPRT_OS_ADAPTER_DAC_INIT_FAILED (-0x7501) //-29953, Initialization failed #define OPRT_OS_ADAPTER_DAC_DEINIT_FAILED (-0x7502) //-29954, Deinitialization failed #define OPRT_OS_ADAPTER_DAC_WRITE_FAILED (-0x7503) //-29955, DAC write failed #define OPRT_OS_ADAPTER_DAC_MODE_ERR (-0x7504) //-29956, Mode error #define OPRT_OS_ADAPTER_DAC_BUSY (-0x7505) //-29957, Busy #define OPRT_OS_ADAPTER_DAC_TIMEOUT (-0x7506) //-29958, Timeout #define OPRT_OS_ADAPTER_DAC_IRQ_INIT_FAILED (-0x7507) //-29959, Interrupt initialization failed #define OPRT_OS_ADAPTER_DAC_RESERVE1_ERR (-0x7508) //-29960, RESERVE ERR1 #define OPRT_OS_ADAPTER_DAC_RESERVE2_ERR (-0x7509) //-29961, RESERVE ERR2 #define OPRT_OS_ADAPTER_DAC_RESERVE3_ERR (-0x750a) //-29962, RESERVE ERR3 #define OPRT_OS_ADAPTER_DAC_ERRCODE_MAX_CNT 11 /**************************************************************************** the error code marco define for module OS_ADAPTER_I2S ****************************************************************************/ #define OPRT_OS_ADAPTER_I2S_INVALID_PARM (-0x7600) //-30208, Invalid parameter #define OPRT_OS_ADAPTER_I2S_INIT_FAILED (-0x7601) //-30209, Initialization failed #define OPRT_OS_ADAPTER_I2S_DEINIT_FAILED (-0x7602) //-30210, Deinitialization failed #define OPRT_OS_ADAPTER_I2S_WRITE_FAILED (-0x7603) //-30211, I2S write failed #define OPRT_OS_ADAPTER_I2S_READ_FAILED (-0x7604) //-30212, I2S read failed #define OPRT_OS_ADAPTER_I2S_MODE_ERR (-0x7605) //-30213, Mode error #define OPRT_OS_ADAPTER_I2S_BUSY (-0x7606) //-30214, Busy #define OPRT_OS_ADAPTER_I2S_TIMEOUT (-0x7607) //-30215, Timeout #define OPRT_OS_ADAPTER_I2S_DATA_LOST (-0x7608) //-30216, Data lost #define OPRT_OS_ADAPTER_I2S_TRANS_ERR (-0x7609) //-30217, Transmission error #define OPRT_OS_ADAPTER_I2S_IRQ_INIT_FAILED (-0x760a) //-30218, Interrupt initialization failed #define OPRT_OS_ADAPTER_I2S_RESERVE1_ERR (-0x760b) //-30219, RESERVE ERR1 #define OPRT_OS_ADAPTER_I2S_RESERVE2_ERR (-0x760c) //-30220, RESERVE ERR2 #define OPRT_OS_ADAPTER_I2S_RESERVE3_ERR (-0x760d) //-30221, RESERVE ERR3 #define OPRT_OS_ADAPTER_I2S_ERRCODE_MAX_CNT 14 /**************************************************************************** the error code macro define for module GW_SUB_MGR ****************************************************************************/ #define OPRT_GW_SUB_MGR_INIT_FAIL (-0x7700) //-30464, Sub-device management module initialization failed #define OPRT_GW_SUB_MGR_BIND_THREAD_CREATE_FAIL (-0x7701) //-30465, Binding thread creation failed #define OPRT_GW_SUB_MGR_EXCEED_MAX_CNT (-0x7702) //-30466, Exceeded the maximum number of sub-devices #define OPRT_GW_SUB_MGR_NODE_CREATE_FAIL (-0x7703) //-30467, Sub-device node creation failed #define OPRT_GW_SUB_MGR_CLOUD_HTTP_BIND_FAIL (-0x7704) //-30468, Cloud HTTP interaction failed #define OPRT_GW_SUB_MGR_ERRCODE_MAX_CNT 5 /**************************************************************************** the error code macro define for module APP_TMP ****************************************************************************/ #define OPRT_APP_TMP_xxx (-0x7800) //-30720, XXX #define OPRT_APP_TMP_ERRCODE_MAX_CNT 1 /**************************************************************************** the error code macro define for module IMM_COM ****************************************************************************/ #define OPRT_IMM_COM_MEM_PARTITION_FULL (-0x7900) //-30976, Memory buffer full #define OPRT_IMM_COM_ERRCODE_MAX_CNT 1 /**************************************************************************** the error code macro define for module IMM_CLOUD_STORAGE ****************************************************************************/ #define OPRT_IMM_CLOUD_STORAGE_ENCRYPT_KEY_UPDATED (-0x7a00) //-31232, Storage buffer full #define OPRT_IMM_CLOUD_STORAGE_STATUS_OFF (-0x7a01) //-31233, Cloud storage off status #define OPRT_IMM_CLOUD_STORAGE_UPLOAD_INTERRUPT_ERROR (-0x7a02) //-31234, Network report caused interruption #define OPRT_IMM_CLOUD_STORAGE_EVENT_STATUS_INVALID (-0x7a03) //-31235, Event status error #define OPRT_IMM_CLOUD_STORAGE_ERRCODE_MAX_CNT 4 #define ERRCODE2STRING(errcode) #errcode #define TUYA_ERROR_STRING(errcode) ("[ErrCode: " ERRCODE2STRING(errcode) "]") #define TUYA_CHECK_NULL_RETURN(x, y) \ do { \ if (NULL == (x)) { \ PR_ERR("%s null", #x); \ return (y); \ } \ } while (0) #define TUYA_CHECK_NULL_GOTO(x, label) \ do { \ if (NULL == (x)) { \ PR_ERR("%s null", #x); \ goto label; \ } \ } while (0) #define TUYA_CALL_ERR_LOG(func) \ do { \ rt = (func); \ if (OPRT_OK != (rt)) { \ PR_ERR("ret:%d", rt); \ } \ } while (0) #define TUYA_CALL_ERR_GOTO(func, label) \ do { \ rt = (func); \ if (OPRT_OK != (rt)) { \ PR_ERR("ret:%d", rt); \ goto label; \ } \ } while (0) #define TUYA_CALL_ERR_RETURN(func) \ do { \ rt = (func); \ if (OPRT_OK != (rt)) { \ PR_ERR("ret:%d", rt); \ return (rt); \ } \ } while (0) #define TUYA_CALL_ERR_RETURN_VAL(func, y) \ do { \ rt = (func); \ if (OPRT_OK != (rt)) { \ PR_ERR("ret:%d", rt); \ return (y); \ } \ } while (0) // clang-format on #ifdef __cplusplus } #endif #endif